Alex Ruben
How to Resolve the “No Internet, Secured” Error on Windows 10/11
The “No Internet, Secured” error can be frustrating for Windows 10 and 11 users, signaling a problem with your wireless connection. This guide provides systematic solutions to overcome this issue and restore your internet access. By the end of this tutorial, you’ll learn several effective methods to fix this common WiFi problem on your Windows devices.
Step 1: Restart Your Computer and Router
The first and simplest solution to try is restarting both your computer and your WiFi router. This can often resolve temporary connectivity issues. Follow these steps:
- Turn off your computer.
- Unplug your router from the power source.
- Wait for about 30 seconds.
- Plug the router back in and allow it to fully restart.
- Start your computer again and check the connection.
Step 2: Run the Network Troubleshooter
If restarting didn’t help, use the built-in network troubleshooter:
- Open the Settings app by pressing Windows + I.
- Go to System and then select Troubleshoot.
- Click on Other troubleshooters.
- Find and run the Internet Connections troubleshooter.
- Follow the on-screen instructions to detect and fix issues.
Step 3: Reset Network Settings
If the problem persists, you may want to reset your network settings:
- Press Windows + I to open Settings.
- Select Network & Internet.
- Scroll down and click on Status.
- Click on Network reset.
- Hit Reset now and confirm the action.
This will remove and reinstall all your network adapters and set other networking components back to their original settings.
Step 4: Update Network Drivers
Outdated or corrupted drivers can also lead to connectivity issues. Here’s how to update them:
- Right-click the Start button and select Device Manager.
- Expand the Network adapters section.
- Right-click on your WiFi device and select Update driver.
- Select Search automatically for drivers.
- Follow the prompts to complete the update.
Step 5: Release and Renew IP Address
To resolve potential IP conflicts, you can release and renew your IP address using the Command Prompt:
- Press Windows + R to open the Run dialog.
- Type
cmdand press Enter to open Command Prompt. - Type
ipconfig /releaseand press Enter. - Next, type
ipconfig /renewand press Enter. - Close the Command Prompt and check your connection.
Additional Tips & Common Issues
Here are some additional tips that may help you:
- Ensure that airplane mode is off by checking Network & Internet settings.
- Make sure you are within range of your WiFi signal.
- Verify that no VPN or proxy connections are interfering with your internet access.
Conclusion
By following these steps, you should be able to effectively resolve the “No Internet, Secured” error on your Windows 10 or 11 device. If the issue persists, consider reaching out to your Internet Service Provider for further assistance or reviewing your network configuration. For more tips and guides, check our other troubleshooting articles!
Frequently Asked Questions
What does “No Internet, Secured” mean?
This message indicates that your device is connected to the WiFi network but is not receiving internet access due to potential configuration or connection issues.
Can I fix this issue without restarting my devices?
Yes, you can try running the Network Troubleshooter or resetting network settings without requiring a restart; however, restarting may help clear transient issues.
Will this guide work on Windows 7?
This guide specifically addresses issues on Windows 10 and 11, so it may not apply fully to Windows 7, as the procedures differ.